For Evinrude - Johnson - E-Tec - Cobra - Mercury - Volvo + Other Motors.
The newest style/model propeller from OMC/BRP is "The Rebel". By far the most superior propeller available on the market today.
BRP (Evinrude Johnson Parts) has also introduced the TBX multiple piece propeller hub system.
Prob hub kits are included with props labeled TBX. Adds a new level of durability and reliability to the Raker II, Bass, Renegade and Cyclone Propellers. Cushions shock loads to protect the lower unit drive train.
Made of special aluminum alloy. Baked-on corrosion resistant paint gives added protection.
One piece castings eliminate the weakness of welded blades. Superior for all brand outboard engines, built to last. After-market and other brands, (eg. Rascal, Hustler, Solas, Quiksilver, Michigan Wheel and OEM props, etc.), do not come close to Evinrude's nearly 100 years of experience manufacturing boat propellers.
A Stainless prop will last longer than an aluminum prop, plus offers greater performance - beneficial for avid boating and water skiing. Has a "Thru-hub" exhaust and 3-blade painted stainless steel design. A low pitch propeller that comes standard double cupped, and is also available triple cupped for pontoon applications. SST props are repairable if damaged.
The SST propeller is 5 times stronger than an ordinary aluminum prop. The blades thinner are thinner for a cleaner bite to achieve higher top end speed. The SST is a fast planing prop with thru-hub exhaust and cupped blades. More expensive than aluminum, but highly recommended for the serious boater.
SST II---Double cupped blades on the SST II propeller let the user trim out more for greater speed. The outboard can be mounted higher for peak performance with less slippage then single cupped blades. With the SST II propeller, more MPH means more MPG. Boats go farther as well as faster on each gallon of fuel. Like the SST, the SST II propeller features super thin blades for cleaner bite and extra thrust; yet they're still 5 times stronger than aluminum.
The newest and most superior prop available on the market!
Rebel propellers are designed and engineered to deliver excellent fuel economy plus improved midrange and top-end performance. Great in offshore, large runabouts and even large pontoon boat applications for maximum boat and engine performance.
3-blade propellers, designed with a large diameter and efficient blade contour to provide faster speeds at lower rpm, improved fuel economy for more miles per gallon, increased top end speed, and a longer cruise range. The Rebel propellers are made of highly polished stainless steel with right-hand and left-hand rotation available.
3-blade propeller (highly polished), thru-hub, stainless steel prop with high blade rake to increase bow lift. For bass, runabouts or high performance boats. Ideal for boat applications over 50 mph in V-4 and V-6 Evinrude and Johnson outboard engines.
Rake is the measurement of the angle of the blade's tip toward or away from the gear case.
The custom cupped high rake blades provide superior bow lift and make your bass boat or high performance runabout plane fast and run fast. Made from aircraft quality stainless steel. The outer exhaust hub has drilled holes to ventilate the three highly polished stainless steel blades for more powerful acceleration.
3 blade performance, high lustre finish - Made for speed!
Its longer swept blades and a larger diameter give this prop a better grip on the water, faster acceleration and greater top end speed. It's fast out of the hole and delivers maximum top end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats. A good choice for Evinrude Johnson V4 and V6 outboard engines.
CYCLONE TBX Stainless Steel Props:
4 blade offshore and runabout prop. For V6 engines. Designed for heavier and twin-engine boats. Handles well in all water conditions. Stays on plane with minimum RPM.
V4 & V6 engines. 4 blade polished stainless steel design, with contoured cupping. Ideal for bass tournament style boats traveling in rough waters. Superior hole shot. Reduced steering torque.
Amazing "hole shot" acceleration and excellent top end speed that will stay hooked up under the most difficult conditions. The Renegade bass propeller also provides excellent mid-range power and reduced steering torque. Under normal conditions, when switching from a Raker, an increase in pitch is recommended. The Bass Renegade comes with an accessory weed ring.
Renegade Bass TBX:
The new TBX prop hub system technology. Prob hub kit included with props labeled TBX. Adds a new level of durability and reliability to the Raker II, Bass, Renegade and Cyclone Propellers. Cushions shock loads to protect the lower unit drive train.
Renegade Bass Offshore:
A 4 blade that stays on plane with minimum RPM.
The Renegade Offshore propeller is designed to propel twin engine offshore boats.
Features a "Thru-hub" exhaust and 4-blade polished design. This propeller has moderate blade rake (less than Bass model) and is offered in lower pitches and left-handed rotation for heavier and twin engine boats. Helps you stay hooked up in heavy seas, and reduces throttling down between swells. The Renegade Offshore propeller also gives great acceleration, top end speed, and fuel economy.
Bites the water and stays on tight.
3 blade prop. For pontoon and work boats. Aggressive cupping - excellent gripping, that holds tight in turns with maximum thrust in all water conditions. Big blade area works well in high reverse thrust.
New Hydrus Propeller Exhaust Ring: Part Number #50006512.
Improves midrange engine operation and performance on Evinrude E-TEC 40, 50, 60, 75 and 90 hp engines. The Hydrus propeller exhaust ring should be used on gearcases fitted with Hydrus propellers Part Numbers: 177201, 177202 and 177203.